Electricity Consumption Meter Observer Using GSM
It is very widely used project in industry and homes. It keeps the track on electricity meter and whenever it exceeds the pre-defined value it sends the message to user. Secondly, it sends the electricity bill and units consumed to the user after the month.
1 Phase Auto Selector With SMS Alert
It is very useful project in the industry. It eliminates the manual shifting of load from one phase to another phase and at the same time it sends the message to user. This project consists of GSM Modem, PT, power supply circuit, 232 level converter, LCD display and relay circuits.
Intelligent Power Management System
In the modern era of technology, we come across various wireless control systems for our appliances or machines. Apart from the wireless switching of appliances, the working hours of machines plays a vital role, which depends majorly on the power supply. This project will help us to keep the track of power supply cuts. In this project, an intelligent system will observe the AC mains and it will notify about the status of AC mains to the user. At the same time, a mobile is connected with the same circuit which will be used to switch on/off the appliances or machines.
Temperature Controlled Applications/Machines
In this project, various home appliance/machines are switched on/off according to the current room temperature. This project includes temperature sensor, ADC, microcontroller, LCD and relays.
Current Measurement With Auto Cut-Off
It measures the current of our load. As the load increases from the predefined current value, supply voltage goes OFF automatically. When the load comes within the predefined limits, supply goes ON automatically. Current measure by the CT transformer is not the actual current of load. It is just a rational current. It includes CT, microcontroller, and ADC, LCD and cut-off circuit.
Android Based Automatic Meter Reading
As the name despite it's a power consumption monitoring project it monitors the power consumed by the persons in the house or industry and sends the data on an android app, connected with the device.
Electrical distribution control System
It controls four different zones, for time control electrical distribution system.
Automatic Bottle Filling With Capping
In this project, we present the concept of automatic bottle filling and capping system used in the industry (like soft drink industry). This project consists of a conveyor, sensor assembly and a pump. When conveyor moves, then firstly sensor bottle is filled up for a predefined time and then again conveyor moves further till capping sensor. At this sensor, a vertical arm moves down and caps the bottle. This project has power supply circuit, microcontroller, LCD, motor circuits and sensor assembly.
Overload Shut Down With SMS Alert
In the modern era of electronics, every machine is automatic and at most of the times machines run without the presence of any human being. This system tells the user about overload on machine due to any problem by sending a text message to the user and thus the user can get alert against unwanted shutdown for a long time.
IOT Based Industry Protection System
It is a security system which can be installed in every industry to measure all the important parameters and update them on the companies server from which it can be monitor if any of the parameter crosses the critical level it sends the alert notification for taking important steps to stabilize the condition.
IOT Based Energy Meter Moitoring System
This project is used for the electricity department and the consumers in this a circuit is designed with the energy meter which reads the pulses from the meter and update them on a webpage from their consumer and the authority can monitor power consumption and updating the bill.
RTC Based Irrigation System
In this project we have designed an irrigation system, this system is based on Real Time Clock with which we have attached a microcontroller which reads the time from the RTC and operates the pump on the fixed time to water the fields for irrigation.
Programmable Energy Meter
This energy meter is to be used for homes and industries third meter is programmable we can program it by the switches attached to it for setting the rate per units the circuit attached to it reads the pulses from the meter and display it on the LCD with the bill estimation. We are using microcontroller for all the calculations.
Speech Controlled wireless Home Automation
In this project we can control our home appliances with the voice commands, e.g. lights on, lights off etc. for this we are using a microcontroller, Bluetooth, and an Android application.
PLC Based Automatic Alarm System in Plants
It is an industrial application based system in which we uses various sensors to measure different things like measuring temperature of the boiler, when it gets a specific condition it alerts the user by raising an alarm.
Auto Power Supply Control from 4 Different Sources
This project is a uninterrupted power supply system in which we having power from 4 different ways like air, water turbines, solar panels and generators if any of the mode is turned of it switches to the next for providing power to the system uninterrupted.
Current Control System
This project checks the current level (not absolute value) by current sensing coil. The circuit is switched off if current flow overloads. Overload is displayed on LCD.
It is a mobile based project. In this, mobile sets are used to control the remote appliances. In this project, an AC pump/motor (representing actual 1 phase AC motor) is controlled by the mobile set.
IOT Based Industrial Automation
This project is used for industrial automation over the internet by using IOT and the web applications we just have need to open a web page in the browser and control the devices from the buttons in the web page.
Transformer Wireless Protection
This project is designed for continually monitoring the parameters of the Transformer's, to protect them from any kind of damage from overheat, overload. For measuring it we are using temperature sensors and current sensors connected with a microcontroller which measures and displays the value on the LCD and if any of the parameters reaches the critical conditions then it shut-downs the transformer for the safety.
IOT Based Smart Green House System
Green house systems are designed for indoor agriculture where we have to monitor and control various environmental parameters, for measuring the parameters we have to install various sensors all of this data is collected by an microcontroller and send to the other device over the internet form where we can control lights, fans, water etc. and monitor all the conditions on a computer screen or smart phone.
IOT Based Home Automation
In this project we are utilizing the concept of the Internet of the Things (IOT) for the home automation with the help of this project we can control anything available in the household from anywhere in the world by using internet for this we purpose we are using an mobile applications.
“Entry” & “Exit” Gate Counter
This project is applicable in some public places like Shopping Malls. Basic function of this project is to count the number of “entered visitors” and “visitors that exit”, and display the count. This project includes IR sensors, LCD and microcontroller.
PLC Based Home Automation
This is a home automation project based on the PLC (Programmable Logic Controller) in this we are using various sensors to operate lights, fans and water pumps etc.
1 – Phase Automatically Selector Among 3-Phase Power Supply
It is an intelligent system for 1-phase load. It automatically shifts load to second phase if first phase goes off and so on.
IOT Based Irrigation System
It is wireless IOT based control system in which we can control water pumps in the agricultural lands remotely from the android application. Which works on the internet, Wi-Fi module connected in with motor receives the signal and controls the motor to start and stop it
RF Controlled Electrical Devices
It is a wireless controlled home appliances system. In this, we use the concept of RF communication. RF means Radio Frequency. We use the radio waves to communicate with the transmitter and receiver end. We are using a RF transmitter and receiver module, so that transmitter end can communicate with receiver end. A key pad is attached with the RF transmitter which acts as a Controlling key Pad. RF receiver is mounted with the electrical system, which continuously receives the transmitted data. According to received data, microcontroller takes decision and switches ON/OFF the various home appliances. In this, transmitter sends data which is received by RF receiver and processed by microcontroller and finally microcontroller takes decision according to received data. It includes RF modules, microcontroller, LCD, and relays.
Talking Energy Meter
The purpose of this project is to build a KWH (Kilo Watt Hour) meter that can alert the users with voice messages. An energy meter or KWH meter is a device that measures the amount of electrical energy supplied to or produced by a residence, business or machine. The idea behind this project is to construct the Energy Meter that is useful for illiterates and blind people. This system helps the users by speaking out the units and bill. The voice alerts could be in any local language, hence this system can be used across the world.
Adjustable Temperature-control Device
According to this project, we can adjust the temperature according to our requirements. In this project, a real life home appliance will come in action according to the present temperature. It includes a menu to adjust the switching temperature of appliance (A.C. or Fan). This project includes a temperature sensor, microcontroller, Menu pad, LCD and relays.
Gesture Controlled Home Automation
This project is used to control the home appliances with the hand gesture of the person; this project is designed for the physical disable persons who are on wheelchair to control the appliances by their hand gestures. For this we are using accelerometer, RF Modules, microcontroller and relays.
Transformer overheat protection
It has been often seen that transformer blow out when it is overheated. In this project we will implement a temperature sensor at the transformer and whenever temperature exceeds the specific value it triggers the cooling fan.
Fuzzy Logic Based Farming System
This project implies the concept of fuzzy logic in the agriculture, in this we uses the soil moisture sensor to detect the moisture level of the soil and depends on that microcontroller takes the decision that how much water needs to dispense to the machine.
Generally, solar panels are stationary and do not follow the movement of sun. Here is a solar tracker system that tracks the sun’s movement across the sky and tries to maintain the solar panel perpendicular to the sun’s rays, ensuring that the maximum amount of sunlight is incident on the panel throughout the day. The solar tracker starts following the sunlight from dawn, throughout the day, till dusk and starts all over again from the dawn the next day.
Programmable Electrical Distribution
In this project, we show that how we control the electrical distribution with different timings control. All the timings are control by the embedded digital clock. We control on time and off time for all the four different outputs with the help of menu driven software.
Free Hand Controlled Home Appliances
In this project, we control the home appliances with the freehand movement of user. It is very useful for physically disabled persons. A user can on/off appliances as per his hand movements.
Power Failure Indicator
It indicates the power line failure to the specific machine or appliance. We can use it by two ways:
- Power failure is shown on LCD by the wired connections. It includes microcontroller and LCD.
- Power failure to some limited distant by the use of RF concept. It includes microcontroller, LCD and RF module.
Zigbee Based RFID Billing System
In this project, we use the wireless technology to transmit the data from customer to sale desk and every commodity has a unique number which is read by the RFID reader and an appropriate bill is generated and transmitted to the sale desk. It avoids the waiting time at the cash counter.
This project is designed for making an electronic stove to be controlled by an Android application and also there are sensors attached which stops the stove. For the wireless communication between the stove and smart phone we are using Bluetooth modules.
TEG Electricity Generator
It uses the heat energy to generate the electricity. The basic fundamental of this technique is thermal difference as the thermal difference increases at the surface it generates more voltage at the output.
Electricity Theft Monitoring System
Electricity theft is one of the major issues in the present world, this project is used to check for the power theft, in this we are using CT coils to measure the power consumed by the user if user is consuming power more than they are authorized this system shut downs the entire supply and alert the Electrical department using GSM.
P.C. Controlled Electrical Appliances
In this project, we show that we can control electrical appliances with the help of computer and microcontroller based assembly. Microcontroller is connected to the PC via parallel port which is unique feature of embedded system control hardware.
Smart Mobile Irrigation System
This project has unique application in the field of agriculture. It eliminates the problem of farmers by providing them a very feasible system like they can check the status of water in their crops and at the same time they can control the status of water pump from their mobile handset. As this project is GSM based, so there is no limitation.
IOT Based Underground Cable Fault Monitoring System
Most of the communication network is installed under the ground with the help of wires this system can be installed at various points in to monitor the wires if any of the wire gets damaged then it sends the alert message to a web server with the details of faulty wire and the approximate location.
Road Energy Utilization with Saver
In this project, we utilize the road energy for the generation of electrical power. At the same time, we save street light energy when the road is not busy.
Power Line Failure Detection System
This project is used here to check the power lines in the electricity grid, if any of the lines get failed due to any reason this system sends the alert to the control room wirelessly with the RF technology in which we have attached a buzzer and led to display which line is failed.
Programmable Switching Control for Industry Automation
It is a switching device which includes an RTC based digital clock in this project we can control two or more loads at a fixed time which we can enter in to the microcontroller from the switches connected with it.
Pre-paid Energy Meter
It is a prepaid energy meter. We have to pay first to use the electricity. If balance is zero, then we can’t use the electricity. We can recharge our energy meter by two methods. It is not the real life feasible project. It is just to show the concept of pre-paid energy meter.
- By the use of RF principle: - In this, we have a wireless keypad at electricity center. This is used to recharge our energy meter. It includes RF module, microcontroller, LCD and relay.
- By the use of GSM principle: - In this, our GSM mobile is used to recharge the energy meter. It includes a microcontroller, DTMF, LCD and relay.
Temperature Measurement & Transmission Using IR
It measures the temperature of an object and sends it to the receiver end wirelessly by the use of IR rays. This project uses a temperature sensor, an ADC and IR channel, Transmission of data to receiver end is limited by distance factor.
Automatic Fan Direction control for workshop
It is a very effective to approach to save the energy and maximum utilization of power in workshops. As we know, in workshops, worker has to move here and there and it becomes very tuff for them to work when it is hot. In this project we will make a intelligent fan which will find out the human being’s location and rotate as per his location means as the worker moves fan direction also moves. Circuits used in project are PIR circuit, microcontroller, and motor Circuit.
PLC Based Colour Mixer
Color mixer is a industrial machine which we can use to mix various colors to make some specific colors in the limited quantity all this is programmed in the PLC. We have designed a conveyor which is stopped by the sensors fixed on them.
Android Home Automation
In this project we are controlling home appliances with the help of application based on android with this we can control anything in the home such as Fan, Bulb, TV and Sockets etc.
GSM Controlled Home Appliances
Its function is to switch on/off our home appliances with the help of GSM. In this, a mobile phone (acting as a GSM receiver) is connected with home appliances, which controls the switching on/off of home appliances. We can use any GSM mobile to control the home appliances.
PLC Based Railway Crossing
Railway crossing is the very commonly seen thing in the world in this project we have designed a system in which we have installed the sensors on the track to check for the train if the train is coming barriers get down automatically and when train crosses the track barrier opens automatically so no operative is required.
Zigbee Based Energy Meter Monitoring System
It is a power monitoring system to be used in the home and offices to monitor the power consumption in this we have a circuit with the Energy Meter to read the values and estimating the bill which is then send to the other circuit wirelessly to be displayed on the LCD. For the wireless communication we are using Zigbee as the transmitter and the receiver.
Temperature Dependent Speed Of DC Motor
In this, DC motor’s speed varies according to the current temperature. As the temperature decreases, speed decreases and vice versa. To control the speed of DC motor, PWM is used.
Voice Control Home Automation
In this home automation project we are using voice identification modules which identifies the voice and compares the speech with stored one and if both matches it sends the signal to the microcontroller which then operates the appliances in the rooms.
IR Visitor And Energy Saver
This project counts the number of people who enter a room and switches “ON” the light according to the gathering inside the room. Same way as the gathering decreases lights goes “OFF” and the counting decreases. This project uses IR sensor to detect person. To ‘switch’ the light we are using relay, which are interfaced to microcontroller. A LCD is used to display the gathering of persons.
Fan Speed Control Using Temperature
In this project, speed of fan varies according to the current temperature of room. As temperature increases, speed of fan increases and as the temperature of room decreases, speed of fan decreases. Fan used in this project is DC fan (used in motherboards). This project includes fan, temperature sensor, ADC and microcontroller.
Bluetooth Based Energy Monitoring
In this project we can monitor the power consumption and bill estimation of our house and the office on an android app available in our smart phone. In this we are using Bluetooth communication for the data transmission from the meter to the application.
Solar Power Measuring System
In this project we uses LDR, current and voltage measuring sensors to read the values from the solar panel and sending it to a microcontroller which reads these values and after processing display them on the LCD display.
Over Voltage And Current Wireless Indication
This system helps users by providing them the wireless notification of over voltage and current. This is RF based project. This project consists of CT and PT to detect the overload and voltage and whenever it detects any error, it transmits the data wirelessly to user using the RF communication. This project includes CT, PT, power supply, RF circuits, LCD and buzzer circuits.
In this we are representing the concept of natural resources of electricity in our domestic life. As name depicts we are using solar energy to generate electricity. This project includes a solar cell, a battery and an inverter.
Furnace/ Boiler Temperature Control
Its function is to maintain the boiler temperature within the limits. When the boiler temperature exceeds beyond pre defined limit, fan goes on automatically to lower the temperature. Same circuit can be used to switch some other cooling equipment.
Zigbee based Automatic meter Reading
It is used to display the meter reading at the user by transmitting the reading on the Zigbee module. This project has Zigbee pair, Meter circuit and microcontroller circuit.
It includes variety of sensors which are very common in industry, agriculture and domestically e.g. temperature sensor, rain, fire, smoke and LDR sensors.
Android Based Industrial Monitoring System
This project is for industrial applications in this we measure and display various parameters in the industry on an application where person by sitting in a room can monitor them if any parameter goes beyond the limit then we can also control them from the application.
AC Motor Speed Control Using Power TRIAC
In this project, we control the speed of AC motor by using the TRIAC and microcontroller.
Peltier Electricity Generator
It uses the heat energy to generate the electricity. The basic fundamental of this technique is thermal difference as the thermal difference increases at the surface it generates more voltage at the output.
Here, we use microcontroller as a CPU for Digital Voltmeter. This project includes ADC, microcontroller, LCD and power supply circuits.
Water Pump Control System with GSM
It is a wireless control system for controlling the water pump for the irrigation purpose in the agriculture lands. In this we are using GSM Mobile Network to send a message to the GSM modem which is connected to the microcontroller and relays to operate the pump.
Palace Power Management system
It will help to minimize the electricity bills in palaces, where generally we waste a lot of electricity. When people start to leave palace, because no one particularly is responsible to make lights off, it will automatically switches off the light depending upon the gathering in the palace.
RTC Based Geyser
Geyser is a most common device used in the winters to heat up the water, in this project we are designing an automatic system which switch on the geyser at a fixed time daily. For which we are using RTC, Microcontroller and relays.
Substaion Control Using GSM Message
In this project we are using the GSM Communication for operating the Substation for powering the different areas. In this we are using a GSM Modem, Microcontroller and Relays to control the electricity to the different areas. It can be used in the situation where one substation got failed and we have to shift the load to the other one.
Induction Motor Protection
This system is designed to protect motors from getting burned out by the overheat, in this project we are attaching a temperature sensor with the motor which reads the value of temperature and sends it to the microcontroller which displays it on the LCD, when it reaches the critical limit it shut down the supply of the motor for protecting it.
RFID Based Prepaid Energy Meter
It is a prepaid energy meter. We have to pay first to use the electricity. If balance is zero, then we can’t use the electricity. In this we are using RFID tags to recharge the energy meter. It is not the real life feasible project. It is just to show the concept of pre-paid energy meter.
Up-Down Lift With LCD
In this project, we represent a lift with LCD display on it. We have a keypad menu to select the floor location of the building. After getting the floor number as input it, will move to that particular floor. (Wooden work not included).
Underground Fault Detection
This Project is designed for detecting wire breakage in the underground cables which are mostly used in everywhere in the world, for the communication network. In this we have designed a circuit which continually measures the wires if there is any kind of breakage in the wires then it displays on the LCD.
Set the numeric value on display and start the switch, when 0 circuits are on/off automatically.
PLC Irrigation Controller in Agriculture
This system is used for irrigation purpose to control water supply to the lands it is connected with the sensors to check the level of the soil if it is dry then it automatically turns on the pump.
Touch Screen Based Home Appliances
In this project, we are using the touch technology to switch on/off the home appliances. In this, we are using microcontroller, touch screen, power supply and relay circuits
It is a irrigation based project in which we have connected a sensor to monitors the soil moisture level to maintain it at a fixed level if the value goes down the minimum level it turn on the pump automatically and turn it off when it reaches the max value.
PLC Based Lift
It is a working model of a lift in the building in this we have created two floors which are controlled by a PLC, with the help of sensors and the buttons. We are using a DC Motor for moving lift up and down.
Bluetooth Controlled Industry Automation
In this project we can control different appliances or machines used in the industry just by using a smart phone like Android Devices in which we have an application installed for controlling all these things.
GSM Automatic Meter Reading
It is a very unique idea to keep track on the meter in commercial and industry field. In this project microcontroller periodically transmit the reading of meter to the user mobile. As we are using pre established GSM mobile network so its live implementation is very easy. It includes GSM modem, Max 232, LCD, microcontroller, meter and power supply circuit.
P.C. Controlled Wireless Home Automation
In this project, we show that we can control electrical appliances with the help of computer, RF module and microcontroller based assembly. Microcontroller is connected to the PC via the parallel port. This project can control up to 4 units with the help of PC output with RF technology.
It uses a variety of sensor which includes temperature sensor, fire sensor, rain sensor and LDR sensor. It continuously shows the status of all sensors on LCD. It also includes LCD and microcontroller.
Dual Power Supply With KEYPAD And DISPLAY
This project has various DC Voltages (5V, 9V, 12V, 15V, 24V, -5V,-9V,-12V,-15V,-24V) at a common output terminal. We can select any voltage at our terminal by the keypad. An LCD is used to display the current value of voltage at the output terminal. This project includes microcontroller, keypad, LCD, relays and different power supplies.
Servo Controlled Voltage Stabilizer With Higher And Lower Cut Off
It utilizes a servo to control the low and high voltage of AC power supply. It automatically cuts the power supply if it is below/above the predefined voltage levels.
Temperature Control For Spa
This project controls the temperature level of spa room with preset able control and maintains the temperature by cut off / on the unit.
Boiler Temperature Control
This project maintains the boiler temperature within limits. If the temperature exceeds the predefined limit, fan gets on automatically to lower the temperature. Same circuit can be used to switch some other cooling equipment. This project includes temperature sensor, microcontroller, LCD and relays.
PLC Based Car Parking System
It is an automatic car parking system which is designed with the help of an PLC, Sensors and the Motors, when a car approaches the door for entry PLC checks for the status if there is slot available for parking if it is available barrier automatically opens and closed after car crosses it same on the exit gate barrier automatically controls by the PLC this all works with the inputs from the sensors.
Footstep Power Generation System
It is a power generation based project in which we makes a platform in which we have place piezo-electric modules, when we presses the platform from the foot then it generates the voltage which can be measured by a voltage meter.
Auto Intensity Street Light System
This system is used to control the street lights on the roads by controlling the light intensity of them corresponding to the sun light. In this we use PWM to control the lights.
Temperature Controlled Wireless Industry Control
It measures the temperature of specific point in the industry and transmits it to the control room, where it is used to take the appropriate action.
Zigbee Based Home Automation
It is a wireless home automation system in which we have a remote with the buttons and a Zigbee with the transmitter when we press a button signal is send to the other Zigbee at the receiver and then to the microcontroller which controls the appliances with the help of relays.
Street Light Control With Morning Alarm
During the night a bulb of 220V AC will glow which will automatically get off during the day time. In the morning, an alarm will blow representing the start of day.
Hybrid Power Generation
As the name suggests it consist of two power generation method namely hydro power plant and steam turbine. By default hydro power plant is used to serve the load, when ever load exceeds the specific value then a microcontroller automatically triggers the steam turbine, so that load could be derived without any shut down
IR Visitor System With Energy Saver
This project counts the number of people entering a room, and switches ON the light according to the gathering inside the room. Similarly, as the gathering decreases light goes OFF and the count decreases. This project uses IR sensor to detect a person. To switch ON/OFF the light, we are using relay which is interfaced to microcontroller.
Wireless Speed Control Of AC Motor
In this project, we wirelessly control the speed of AC motor by using the TRIAC and RF modules.
IR Road Energy Saver
It saves the electricity from street lights of road, when road is free from traffic. According to this project, lights will be automatically switched ON when a vehicle is detected on road. Here, we have a road track with two sensors on both the sides of the lights which continuously check for the vehicles. The lights are switched ON/OFF according to the situation on road.